Recently added item(s)
中國大西洋高強度鋼拉力電焊條 CHE56 E7016 (全位置焊接) 3.2x350mm (每箱20公斤共4小包, 每包5公斤)
中國大西洋高強度鋼拉力電焊條 CHE56 E7016 (全位置焊接) 3.2x350mm (每箱20公斤共4小包, 每包5公斤)
$296.00
適用於以下高強度鋼材焊接(490N/mm2級別):
EN10025 S355
EN10025 E295
EN10225 S355
EN10113 S355
描述
CHE56
Covered Welding Rod for High Tensile Steels
AWS A5.1 E7016
BS EN ISO 2560-B-E4916-1 A
CSA W48-06 E4916
JIS Z3212 D5016
GB/T 5117 E5016
| Type of Covering: Welding Position: Type of Current: |
Low hydrogen, potassium F, H, HF, OH, V DCEP or AC |
Features & Applications
It is used for main parts of ships, e.g. boilers, pressure vessels and pipes made by equivalent
tensile strength steels, such as A, B, D, E, AH36, DH36 or EH36. Also it can be applied to
homothetic strength structures of bridges, machineries, constructions, vehicles and so on.
The weld metal has good performance of plasticity, impact toughness and crack resistance.
Chemical Composition of Deposited Metal (%)
| C | Mn* | Si | S | P | Cr* | Ni* | Mo* | V* | |
| Standard | ≤0.15 | ≤1.60 | ≤0.75 | ≤0.035 | ≤0.035 | ≤0.20 | ≤0.30 | ≤0.30 | ≤0.08 |
| Typical | 0.070 | 1.12 | 0.54 | 0.007 | 0.018 | 0.027 | 0.006 | 0.003 | 0.016 |
The total amount of elements with * one should be≤1.75%
Mechanical Properties of Deposited Metal (AW)
| Yield Strength ReH (MPa) |
Tensile Strength Rm (MPa) |
Elongation A4 (%) |
Impact Value (J) | ||
| -20℃ | -30℃ | ||||
| Standard | ≥375 | 490-660 | ≥22 | ≥47 | ≥27 |
| Typical | 450 | 550 | 30 | 185 | 170 |
The standard of mechanical properties conforms to shipping institutions and the certificate of
inspection would follow it unless the purchaser has special requirement.
Diffusible hydrogen in deposited metal: ≤8ml/100g (mercury process)
X-ray radiographic inspection: Grade Ⅰ
Sizes & Recommended Current (DC+ or AC open circuit voltage ≥70V)
| Size (mm) | 2.5×300 | 3.2×350 | 4.0×400 | 5.0×400 | |
| Current (A) |
F, H | 70-110 | 100-140 | 140-180 | 180-230 |
| V, OH | 50-80 | 80-110 | 130-170 | — |
Approvals
| Institute | CCS | LR | ABS | BV | GL | DNV | NK | BKI |
| Grade | 3YH10 | 3Ym, H15 | 3Y | 3YHH | 3YH10 | 3YH10 | KMW53H10 | 3YH10 |
Notice:
1) The rod should be baked at 350℃ for 1 hour before use.
2) The surfaces to be welded must be cleaned away impurities of oil contamination,
rust, moisture and so on.
3) Short arc and narrow-gap welding is recommended.
商品評價
目前沒有評價。